1、 The gasoline filter is in the chassis:

1. First, release the fuel pressure;

2. Disconnect the battery negative;

3. Jack up the right side of the vehicle body;

4. Then replace the gasoline filter.

2、 In the engine compartment:

1. Open the engine cover to confirm the position of the gasoline filter;

2. First unplug the electrical plug, then loosen the snap ring with a suitable tool sleeve, and remove the filter for replacement;

3、 In the tank:

1. Remove the rear seats and remove the surface dust on the cover plate;

2. Remove the output and input oil pipes;

3. Use the fuel tank cap remover to remove the cover plate. You can see the gasoline filter at the fuel tank mouth, and remove the gasoline filter assembly;

4. Use a hot-air gun to heat and soften the output and input oil pipes of the fuel filter. Remove and replace the fuel filter.

It depends on your physical model. The replacement method is different for different models. It is recommended that you go to the repair shop for replacement, so as to save time and energy.

The car's ignition key can be replaced after it is pulled out. When the oil pipe is just pulled out, a part of it will flow out and then it will not exist. Remove the old filter element and install the new one. After installing the new filter element, it needs to exhaust.